Software

Comprehensive collection of HVAC Design Software and Plumbing Design Software Programs to help streamline and standardize your Design Process

Programs and Calculations incorporate:

	ASHRAE® guidelines and standards
	SMACNA® recommendations
	ASPE® guidelines and standards
	Psychrometric solutions
	Climatic and Altitude effects
	Duct Fitting Coefficients

	Extensive "Help" files
	Warning Flags when outside of standard values
	Traditional flow and fluids Formulas
	Straightforward input and results
	Over 35 years of Consulting experience

HVAC Airside Design < (Click hyperlink to view details)
Over (23) Programs and Forms, including:

	Fan Static Pressure Calculations
	Duct System Sizing "To Avoid Obstructions" (Enhanced Equal Friction)
	Duct System Sizing "To Avoid Obstructions" (Simplified Static Regain)
	Coil Psychrometrics
	Project Information Request Letters
	Acoustics
	Help Files and "Extras"

HVAC Wetside Design < (Click hyperlink to view details)
Over (20) Programs and Forms, including:

	Pump Head Calculations - Primary, Secondary, & Condenser Water (Cooling Tower)
	Hydronic Pipe System Sizing - Optimum Sizes
	Coil Psychrometrics & GPM Calcs
	Expansion Tank Sizing - CHW & HHW
	Project Information Request Letters
	Help Files and "Extras"

Plumbing Design < (Click hyperlink to view details)
Over (18) Programs and Forms, including:
Now available in International Plumbing Code - 2012 Version

	Fixture Unit Calculations
	Domestic Water System Sizing
	Waste & Vent System Sizing
	Roof Drain System Sizing
	Natural Gas System Sizing
	Domestic Water Heater Sizing
	Help Files and "Extras"

Mechanical Peer Review < (Click hyperlink to view details)
Over (110) Pages and Spreadsheets, including:

	Coordination Between Disciplines
	Mechanical Plan Review Items
	Mechanical Equipment Schedule Items
	Mechanical Central Plant Items
	Mechanical Detail Drawing Review Items
	Mechanical Code Review Items
	Help Files and "Extras"

Plumbing Peer Review < (Click hyperlink to view details)
Over (70) Pages and Spreadsheets, including:

	Coordination Between Disciplines
	Plumbing Plan Review Items
	Plumbing Equipment Schedule Items
	Plumbing Riser Diagram Items
	Plumbing Detail Drawing Review Items
	Plumbing Code Review Items
	Help Files and "Extras"

62.1-2010 & 2013 Comply-VAV < (Click hyperlink to view details)
User-friendly and fast Compliance Calculations and OA "Optimization", including:

Now available in 62.1-2013 Comply-VAV Version (Both I-P and SI Units)

	ASHRAE Standard 62.1-2010 & 62.1-2013 "Ventilation Rate Procedure" Compliance
	Calculations Take-off Forms, Tables, & Diagrams
	Calculations for Typical Air Handling Unit Types
	Design and Calculation Assumptions
	Determining Occupancy (Zone Population)
	Air Distribution Configuration (Table & Diagrams)
	"Optimizing" Outdoor Air (OA) Requirements
	Compliance Documentation
	Extensive Help Files and "Extras"
	I-P (Inch-Pound) or SI units available in 2010 version and in 2013 version
	Now includes "VAV Scheduler"© for VAV Terminal and Reheat Coil selection and for ACAD Schedule input.

AUTOMATIC OPTIMIZATION ROUTINES (EVEN EASIER AND FASTER)

ASHRAE 62.1-2013 Dedicated Outdoor Air Systems (DOAS) < (Click hyperlink to view details)
DOAS - Required Outdoor Air calculations for compliance with ASHRAE Standard 62.1-2013, and psychrometric calculations to determine supply air condition to offset internal Latent Loads.

	ASHRAE Standard 62.1-2013 "Ventilation Rate Procedure" Compliance - I-P (Inch-Pound) units
	Calculations Take-off Forms, Tables, & Diagrams
	Calculations for DOAS Air Handling Unit
	Design and Calculation Assumptions
	Determining Occupancy (Zone Population)
	Air Distribution Configuration (Table & Diagrams)
	DOAS Loads to offset internal Latent Loads
	Compliance Documentation
	Extensive Help Files and "Extras"

ASHRAE 100 Energy Goal Calculations < (Click hyperlink to view details)
Energy Goal Calculations and Interactive Forms (A, B, and C) for compliance with ASHRAE Standard 100, "Energy Efficiency in Existing Buildings".

	"Compliance Requirements"
	Form A, "Compliance with ASHRAE Standard 100"
	Form B, "Building Activity and Energy Target"
	Form C, "Energy Use Reporting"
	"Building Activity and Energy Target"
	Table B-1, "US and Canada Climate Zones"
	Table 7.3, "Building Operating Shifts Normalization"
	"Help" file

System Requirements
For full functionality of all Software Programs, it is recommended that your system have at least the following configuration:

	Operating System: Windows® 98, 2000, XP, Vista, or Win 7
	Processor: Pentium® or equivalent
	RAM: 500 MB (recommended)
	Disk Space: 50 MB (recommended)
	Software: MS Word®, MS Excel®

In-Progress Software < (Click hyperlink to view details)
Check back soon for additional software, including:


	Network Versions of all Programs
	.... and more to come